| 06/28/15 - 10:29:00 [smartin] KASM-CMDB: Build Checklist : Completed 1. Find available IP address in the master /etc/hosts |
|
|
| 06/28/15 - 10:29:01 [smartin] KASM-CMDB: Build Checklist : Completed 2. Update the /etc/sysconfig/network-scripts/ifcfg-eth0 file to have appropriate values. Use an existing system as a guide. |
|
|
| 06/28/15 - 10:29:03 [smartin] KASM-CMDB: Build Checklist : Completed 3. Update the /etc/sysconfig/network file to have appropriate values. |
|
|
| 06/28/15 - 10:29:06 [smartin] KASM-CMDB: Build Checklist : Completed 4. Remove all entries from /etc/udev/rules.d/70-persistent-net.rules and then reboot the machine. |
|
|
| 06/28/15 - 10:29:09 [smartin] KASM-CMDB: Build Checklist : Completed 5. Fix the timezone on the host by doing the following: |
|
|
| 06/28/15 - 10:29:10 [smartin] KASM-CMDB: Build Checklist : Completed 6. Edit the /etc/resolv.conf to have proper values (use another system as a guide). |
|
|
| 06/28/15 - 10:29:12 [smartin] KASM-CMDB: Build Checklist : Completed 7. Run yum update to get the system up to date. Make sure proper repos are in /etc/yum.repos.d directory first (get from another system). |
|
|
| 06/28/15 - 10:29:16 [smartin] KASM-CMDB: Build Checklist : Completed 8. Send Request for a DNS Entry to be added. |
|
|
| 06/28/15 - 10:29:19 [smartin] KASM-CMDB: Build Checklist : Completed 9. Set up tripwire. |
|
|
| 06/28/15 - 10:29:21 [smartin] KASM-CMDB: Build Checklist : Completed 10. Configuring a second partition if needed |
|
|
| 06/28/15 - 10:29:23 [smartin] KASM-CMDB: Build Checklist : Completed 11. Update sshd_config to block Root logins and allow Nessie exception. |
|
|
| 06/28/15 - 10:29:25 [smartin] KASM-CMDB: Build Checklist : Completed 12. Update the /etc/sudoers file to allow SysAdmins to run root commands. |
|
|
| 06/28/15 - 10:29:26 [smartin] KASM-CMDB: Build Checklist : Completed 13. Run setup and disable/enable unnecessary services. |
|
|
| 06/28/15 - 10:29:28 [smartin] KASM-CMDB: Build Checklist : Completed 14. Install any additional software that customer requested. |
|
|
| 06/28/15 - 10:29:29 [smartin] KASM-CMDB: Build Checklist : Completed 15. MAKE A BACKUP! |
|
|
| 06/28/15 - 10:29:31 [smartin] KASM-CMDB: Build Checklist : Completed 16. Configure system for Nagios. |
|
|
| 06/28/15 - 10:29:32 [smartin] KASM-CMDB: Build Checklist : Completed 17. Send email to SysAdmins asking for one of them to vet the system. |
|
|
| 06/28/15 - 10:29:34 [smartin] KASM-CMDB: Build Checklist : Completed 18. SysAdmin has completed vetting the system. |
|
|
| 06/28/15 - 10:29:35 [smartin] KASM-CMDB: Build Checklist : Completed 19. Make sure the proper root password is set. |
|
|
| 07/01/15 - 10:29:37 [smartin] KASM-CMDB: Build Checklist : Completed 20. Verify with customer that everything is correct on the system. |
|
|
| 07/01/15 - 10:29:39 [smartin] KASM-CMDB: Build Checklist : Completed 21. Update as much information in KASM as possible for the profile of the server. |
|
|
| 07/01/15 - 10:29:40 [smartin] KASM-CMDB: Build Checklist : Completed 22. Turn the system over to the customer as delivered |
|
|
System Info